Suburban 20.3Ltr Gas/Electric Water Heater Kit (White Door) Incl
$1,149.00
Faster Recovery – Fast recovery means more hot water. With the burner rating of 12,000 BTU (approx 4kw) and a recovery rate of 40L per hour, it’s the fastest in the industry.
More convenience – All Suburban Water Heaters are designed for easy installation, operation and maintenance. The limit switch and reset button are conveniently located in a housing behind the removable outer door. The electric heat element and combination drain plug/anode rod are also located there, making service a breeze
Longer Life – Heated water attacks all metals, but not porcelain. That’s why Suburban uses a porcelain-lined, steel water heater tank with an anode rod to “absorb” the electrolytic action – just like your water heater at home. The ‘sacrificial’ anode should be checked yearly. Usually, last approx 2-3 years and then need replacement.
A wall panel switch electronically ignites (via 12V) and controls the water heater.
Compare
Specifications
General
Set point temperature: 54 deg
Burner Rating: 12,000 btu (approx) 4kW
Fuel: LPG
Recovery: 40L/hr at 45DegC temperature rise
Water inlet: 1/2" BSP female thread
Please note
Pump pressure must not be higher than 45 PSI
Installation must be done by a qualified gas fitter
Dimensions
Weight 15kg
Dimensions (mm) 320H x 320W x 490D (allow an extra 50mm depth for plumbing fittings)
Warranty 1 year
Heat supply Gas
Capacity 22L
